
Mike Schlup, the managing director of Kalimex – the UK distributor of JLM Lubricants – says that in recent years, the automotive trade has been deluged with research, much of it centred on the changing habits of motorists as they attempt to absorb the rising cost of diesel and petrol, plus the general hike in prices. Whilst several organisations have commissioned research, he reveals two observations that keep rising to the top.
Motorists are avoiding servicing their cars, with some opting for DIY. And they’re keeping their cars for longer.
It’s a flawed strategy, especially when a vehicle is used for a short journey, stop/start driving. In the recent heat wave, for example, this was prevalent because walking in the baking sun was not an option many of us were willing to embrace. As we move into winter, motorists are set to continue with driving patterns that are not healthy for their vehicles, especially when sporadic servicing is added to the mix.
Diesel vehicles, especially, are at risk of damage when used for short journeys. The DPF must have a sustained high exhaust temperature to work properly. Without this, regeneration attempts fail, soot accumulates, the warning light comes on and the vehicle heads for ‘limp mode’ – maybe even complete DPF blockage. Petrol vehicles can also be impacted by short journeys given cold starts lead to increased contamination on injectors, spark plugs, exhaust systems, and batteries.
As a time-served motor factor, they cannot turn the tide and tell customers to head to their nearest garage without delay, but they are in pole position to advise them on a choice of additives, so they can keep their vehicles in good shape in between visits to their mechanic – even if said visits are less frequent.

Factors lead by example
Motor factors carry the torch for the sterling advice they give to motorists, and nowhere is this more important than advising them on the quality and efficacy of the additives they use.
Inferior products will have little – if any – of the active ingredients needed to repair or maintain a vehicle. If customers are not taking their vehicle to their mechanic as often as they should, it makes sense that they should only use trade-trusted and tested additives with the highest concentration of active ingredients.
In the last decade, we have been working with professional motor factors, visiting them to listen, learn, advise, and talk about JLM additives. It stands to reason that if a technician is using these additives every day in the workshop, the humble motorist can follow suit. And the motor factor can recommend them confidently.
Using a quality additive, at the right time, will help motorists to maintain vehicle performance and efficiency, even if they decide to delay the all-important service. Once again, the professional motor factor holds the keys.

JLM’s range of additives
Extreme Clean: This all-in-one formula delivers a ‘top to tail’ clean of the fuel, combustion, and exhaust system, bringing older, neglected diesel/petrol vehicles back from the brink and back to life.
Performance Fuel System Cleaner: As with all JLM in-tank additives, there are dedicated petrol and diesel formulations. This additive is a treatment between services to target unseen contamination in the fuel system and injectors. It helps prevent unwanted build-up, which can affect vehicle performance. And by improving efficiency, motorists can help offset the increasing cost of fuel at the pumps.
Pre-Test Emission Fixer: Every motorist should undertake the basic checks before an MOT to reduce the chance of a costly failure, such as lights, tyres, and wipers. JLM’s Pre-Test Emission Fixer can help to reduce emissions ahead of the MOT to give a vehicle the best possible chance of a first-time pass.
DPF ReGen Plus: DPFs are well known as a common and expensive problem on diesel vehicles. The cerium ingredient in JLM’s ReGen Plus helps to promote regeneration at a lower temperature, reducing soot levels in the filter before they start causing problems.
BluBoost: AdBlue crystallisation can only be discovered when the injector is removed. Using JLM’s BluBoost, a mechanic or motorist can treat the AdBlue before it’s added to the reservoir. This helps to prevent crystallisation, and it stabilises the AdBlue.